|
|
Experimental characterization and numerical simulation of composite adhesive joints using the cohesive zone model approach |
Sarrado Molina, Carlos
|
|
|
|
An experimental data reduction method for the Mixed Mode Bending test based on the J-integral approach |
Sarrado Molina, Carlos
; Turon Travesa, Albert
; Renart Canalias, Jordi
; Costa i Balanzat, Josep
|
|
29 setembre 2015 |
An experimental data reduction method for the Mixed Mode Bending test based on the J-integral approach |
Sarrado Molina, Carlos
; Turon Travesa, Albert
; Renart Canalias, Jordi
; Costa i Balanzat, Josep
|
|
31 maig 2023 |
Experimental investigation of the loading rate dependency of the non-linear damageable behaviour of carbon/epoxy laminates |
Berthe, Julien
|
|
|
31 maig 2023 |
Experimental and numerical investigation on bearing behavior of hybrid thin/thick-ply composite laminates |
Loukil, Mohamed Sahbi
|
|
|
21 octubre 2020 |
Experimental study of simple and multi-leaf masonry slender elements under compressive stress loaded parallel to the face |
Llorens Sulivera, Joan
|
|
|
31 maig 2023 |
Experimental testing and numerical simulation of bearing and filled hole tension carbon specimens under dynamic loading |
Guerrero GarcÃa, José Manuel
|
|
|
|
Exploring the origins of selectivity in soluble epoxide hydrolase from: Bacillus megaterium |
Serrano-Hervás, Eila
; Garcia Borrà s, Marc
; Osuna Oliveras, SÃlvia
|
|
|
1 juny 2018 |
Exploring the origins of selectivity in soluble epoxide hydrolase from: Bacillus megaterium |
|
|
|
5 juny 2018 |
Exploring the origins of selectivity in soluble epoxide hydrolase from: Bacillus megaterium |
Serrano-Hervás, Eila
; Garcia Borrà s, Marc
; Osuna Oliveras, SÃlvia
|
|
|
15 febrer 2020 |
Exploring the origins of selectivity in soluble epoxide hydrolase from: Bacillus megaterium |
Serrano Hervás, Eila
; Garcia Borrà s, Marc
; Osuna Oliveras, SÃlvia
|
|
|
2017 |
Exploring the origins of selectivity in soluble epoxide hydrolase from: Bacillus megaterium |
Serrano Hervás, Eila
; Garcia Borrà s, Marc
; Osuna Oliveras, SÃlvia
|
|
|
31 maig 2023 |
Failure analysis of hybrid glass/carbon thin ply laminates subjected to tensile loading |
Snepsts, Alens
|
|
|
abril 2007 |
Failure mechanism under tensile loads in CFRP 0-90º cross-ply laminates containing voids |
Lozano Pedrero, Carles
|
|
|
|
Failure mechanism under tensile loads in CFRP 0-90º cross-ply laminates containing voids |
Lozano Pedrero, Carles
|
|
|
2005 |
Families of periodic horseshoe orbits in the restricted three-body problem |
Barrabés Vera, Esther
; Mikkola, Seppo
|
|
|
|
Families of periodic horseshoe orbits in the restricted three-body problem |
Barrabés Vera, Esther
; Mikkola, Seppo
|
|
|
31 maig 2023 |
Fatigue cohesive zone modelling of a benchmark test for composites under complex loading sequences resulting in non-self-similar damage evolution |
Leciñana Arregui, Iñaki
|
|
|
31 maig 2023 |
Fatigue failure prediction in GFRP composite laminates: comprehensive fatigue damage model, software implementation in SAMCEF and benchmark tests |
Carreras, Laura
|
|
|
28 juliol 2017 |
Feasibility of incorporating treated lignin and cellulose nanofiber in fiberboards made from corn stalk and rice straw |
Theng, Dyna
|
|
|
2017 |
Fiberboards Made from Corn Stalk Thermomechanical Pulp and Kraft Lignin as a Green Adhesive |
Theng, Dyna
; El Mansouri, Nour-Eddine
; Arbat Pujolrà s, Gerard
; Ngo, Bunthan
; Delgado Aguilar, Marc
; Pèlach Serra, Maria Àngels
; Fullana i Palmer, Pere
; Mutjé Pujol, Pere
|
|
|
|
Fiberboards Made from Corn Stalk Thermomechanical Pulp and Kraft Lignin as a Green Adhesive |
Theng, Dyna
; El Mansouri, Nour-Eddine
; Arbat Pujolrà s, Gerard
; Ngo, Bunthan
; Delgado Aguilar, Marc
; Pèlach Serra, Maria Àngels
; Fullana i Palmer, Pere
; Mutjé Pujol, Pere
|
|
|
|
Fiberboards Made from Corn Stalk Thermomechanical Pulp and Kraft Lignin as a Green Adhesive |
Theng, Dyna
; El Mansouri, Nour-Eddine
; Arbat Pujolrà s, Gerard
; Ngo, Bunthan
; Delgado Aguilar, Marc
; Pèlach Serra, Maria Àngels
; Fullana i Palmer, Pere
; Mutjé Pujol, Pere
|
|
|
1 juny 2018 |
Fiberboards Made from Corn Stalk Thermomechanical Pulp and Kraft Lignin as a Green Adhesive |
|
|
|
5 juny 2018 |
Fiberboards Made from Corn Stalk Thermomechanical Pulp and Kraft Lignin as a Green Adhesive |
Theng, Dyna
; El Mansouri, Nour-Eddine
; Arbat Pujolrà s, Gerard
; Ngo, Bunthan
; Delgado Aguilar, Marc
; Pèlach Serra, Maria Àngels
; Fullana i Palmer, Pere
; Mutjé Pujol, Pere
|
